DWDM Inter-stage Fiber Amplifier

नियमित मूल्य: $1,523.00 (USD)

उपलब्धता: स्टॉक में
अब यह नियमित रूप से मूल्य के साथ खरीदें।

मात्रा कीमत :$1066.1 - $1446.85

कोट सूची में एकाधिक आइटम्स जोड़ने और हम से एक बोली जाओ।

उद्धरण की सूची में आइटम जोड़ने के लिए, हम उद्धृत करेंगे आप कीमत की कुल मात्रा के अनुसार, और तुम आदेश ऑनलाइन भुगतान करें यदि आप हमारे कोटेशन को स्वीकार करने के लिए जारी रख सकते हैं।

विवरण

The product is high stability output power EDFA. The stability Pump Laser and unique ATC (automatic temperature control) and APC (automatic power control) circuit are employed in it as the key component to ensure the high stability and reliability of output power. The unique optical circuit design ensures the excellent optical character. The high stability and high precision MPU system are employed to ensure the control adjustment and display is intelligent and easy.

Professional design GFF (gain flattening filter) with excellent optical path design make flatness and noise reach the best optimization. It can provide 40~80 channels, and above 35nm flatness.

The optical circuit is designed especially for digital optical fiber communication system including:
(1) lower noise figure
(2)high output booster and high sensitivity Pre-Amplifier improve the system loss budget
(3)Broad input power range and output power adjustable make it use easily.

The design of dual Power Mixed and hot swap make it has longer MTBF. Also, the power system can be backup.

Employ the intelligent temperature control system,the fan is on when the module temperature over 45℃, meanwhile it will stop as the temperature is under 40℃, which makes sure the thermal stability and fan’s long life-time, meanwhile, the professional air flow design can also ensure the best temperature stability.

Intelligent network management system. Perfectly network interface: Ethernet, RS-485 and RS-232 network interface,and the open mib ensure the connectivity with all other network management system.

Feature

  • Low noise figure: typical is<4.5dB
  • High Flatness: Typical 1dB
  • Redundancy hot swap power module: mixed plug 110/220VAC and -48VDC
  • Cover whole C+L band: Carrier 40 or 80 chs
  • apply to Long haul transmission system cover dispersion
  • Perfect network management interface:Ethernet,RS-485 and RS-232.
  • Support Telnet and SNMP network management
  • Gain can be adjustable by network and manual
  • High precise AGC and ATC circuit
  • High saturation output power
  • OEM is available
  • Compatible with Bellcore GR-1312-CORE

अनुप्रयोग

  • DWDM Inter-stage Transmission system

Optical Characteristics

पैरामीटर
प्रतीक
Min
Typ
Max
इकाई
तरंग दैर्ध्य
Λc
1529
1550
1564
एनएम
Saturated output power(1)
Po
20
dBm
Input Power
Pi
-35
+6
dBm
Gain Flatness
GF
1.0
dB
Inter-Stage Output Power
Lm
15
dB
Gain
G
20
33
dB
Noise Figure(2)
NF
४.५
dB
Output Power Stability
ΔPo
±0.05
±0.1
dB
वापसी नुकसान
RL
-45
पी एस
PDG
PDG
0.3
पी एस
PMD
PMD
0.5
पी एस

(1):Optional.
(2):Test at 0dBm input.

Electric Characteristics

पैरामीटर
प्रतीक
Min
Typ
Max
इकाई
Power Supply(1)
Vps
85/170
110/220
132/264
VAC
Consumption(2)
P
18
डब्ल्यू

(1):110VAC,220VAC and -48VDC is optional.
(2):Actual consumption depend on the output power and environment temperature.

Environmental Characteristics

पैरामीटर
प्रतीक
Min
Typ
Max
इकाई
ऑपरेटिंग तापमान
Tw
-5
60
भंडारण तापमान
Ts
-40
80
आर्द्रता
10
85
%

Mechanical Dimension

RDA1200:483*236*44(mm)

Order Information

उत्पाद विनिर्देशन

वजन 8.5 g
  • 0

    0समीक्षाएँ

  • 5 सितारे
    4 सितारे
    3 सितारे
    2 सितारे
    1 सितारे

वहाँ कोई समीक्षाएँ अभी तक कर रहे हैं।

आपका ईमेल पता प्रकाशित नहीं किया जाएगा। आवश्यक क्षेत्रः चिह्नित कर रहे हैं *

हमारे लाइव विक्रय से संपर्क करें

ईमेल [email protected] या भरण प्रपत्र नीचे